Lift kits and door panels

[sub-lime70]

Know anyone who makes a good 4" lift kit for the Sub? Also, let me know if you've tried one that was junk.

Anyone have a good set of used door/interior panels, either white or black, or know where NOS/repro's are available?

[Beast388]

I have a Rough Country 4" Lift on my 71 GMC Sub. I ordered the kit with rear springs. It was very complete, all of the necessary parts were there. I did need to purchase bolts for the springs to bolt to the frame. I damaged a few and cut a few. You will probably need a rear brake line (I didn't need longer ones for the front). I ordered the line from 4Wheel Parts, it was a Super lift part. The line cost about $35 and the lifts was $690. I would recommend this kit. Good Luck.

------------------
Beast388
'71 GMC 4X4 Suburban
388 CID Stroker SB

[sub-lime70]

Thanks for the info. How's it ride, compared to stock? What size tires are you running with the lift?

I see you've got a stroker in yours, just like mine. It's the only way to go--these things should never have left the factory with the stock 350.

[dins1]

I have a skyjacker softride 4" lift on my 71 burb. Ride is like factory. I was running BFG 35x12.50x15 on 10" deep white spoke wheels. The tires just touched the front corner of the front fenders.

------------------
71 1/2ton, 4x4, roof, a/c, tilt, auto, and 396

[Beast388]

It rides pretty good, not too soft not to hard. It is hard to say how it rides compared to stock....I have never been in a new one....mine was 3 years old when I was born...LOL. Currently I have 32" BFG Mudders but will go to 33" BFG AT soon. Strokers kick ass...the best part was building it myself.

------------------
Beast388
'71 GMC 4X4 Suburban
388 CID Stroker SB

[This message has been edited by Beast388 (edited October 26, 2000).]

[PICKMUP]

I AM PARTING A 72 CHEV SUB WITH BLK DLX INTERIOR, EXC COND. ALL FOUR PLASTIC DOOR PANELS=$150 + SHIP.