290e

Hi
New to the Altec User board.I've mostly been using Planar speakers for years Quad ,Acoustat ,Magnepan etc. I thought i would like to try some horns and the opportunity to buy some 511 and 802 drivers came up so I bought them. Also bought 1 x 902E ,so I am looking for a second unit if anyone knows where one might be available. I may look for multicell horns that I can run down to 300Hz to match with the 290E if I can find a second unit.Meanwhile I will try the 511 as soon as I can come up with some type of mid bass to 500Hz
Thanks
Andrew

Hi Andrew and welcome aboard. Keep your eyes on ebay for the extra driver. In the meantime you should have fun with the 802's on the 511's. Big change from planars mind you but perhaps a change is in order?

Midbasses can be found more readily on ebay than the 290's. You might want to look for the 416, 421, 515 or the 3156.

There were some 3156's here from gearfreak, maybe they are still available.

GPA 902's, 3156/8256, AC G1 ribbons, horns... - Hostboard Classifieds & Auctions

Good luck with the experimenting.

Hi Atom! The 290 is a cool driver. The E is the oder Alnico version, IIRC. I have a pair of the newer (and much heavier) 290-8L.

These were meant mostly for voice on the big horns. The have the very beautiful phenolic diaphragm. This 'fram will handle a lot more power than the metal 'frams, but does not play as high. Altec specs say they play out to 7 or 8KHz. My measurements show about 5.5KHz as the -6dB point.

Keep an eye on eBay, they turn up there from time to time, along with the multicell horns. If you just need 1, you may find a bargain.

A pair of 290-8K reasonable

ALTEC 290-8K compression drivers

Quote:

---

Originally Posted by Panomaniac

.
.
These were meant mostly for voice on the big horns. The have the very beautiful phenolic diaphragm. This 'fram will handle a lot more power than the metal 'frams, but does not play as high. Altec specs say they play out to 7 or 8KHz. My measurements show about 5.5KHz as the -6dB point.
.
.

---

BTW: Altec also rates their 808/806 drivers with Symbiotek diaphrams as out to 15KHz, but I think according to my ears, more realistically, it only goes to ~10KHz or so.

Thanks
I am following this up:)
Andrew