-
November 2nd, 2002, 05:18 PM
#1
Inactive Member
anyone have a set of baseline numbers for the efi pms with 440cc injectors on a gsr or ITR? stock boost ... werd [img]smile.gif[/img]
-
November 3rd, 2002, 12:14 AM
#2
Inactive Member
I dyno tuned a map for my GSR with JR Crank Pulley upgrade (I see 9 psi) with 440s on Thursday. I could e-mail you what I ended up with, but no guarantees how it works on your car. I probably won't be able to e-mail it until Monday, I have the data on another laptop. Its for a handheld controller, I just put the data sheets in Excel.
-
November 3rd, 2002, 06:34 AM
#3
Inactive Member
now that's what i'm talkin' 'bout cpa!!i will be very happy to take what you have and make some adjustments form there, as i will assume that even though yours is a GSR, and running 9 psi, at least i can use that as a starting point o make some changes for my setup. i have the handheld controller as well. take your time, and thanks!!
[email protected]
-
November 4th, 2002, 06:50 PM
#4
Inactive Member
Vactor: You are welcome to mine... It is for 440cc injectors, but I'm running 11psi. It could use a little work though, even on my car.
Allan
-
November 4th, 2002, 09:23 PM
#5
Inactive Member
<BLOCKQUOTE><font size=2 face="Verdana, Helvetica, sans-serif">quote:</font><table border="0" width="90%" bgcolor="#333333" cellspacing="1" cellpadding="0"><tr><td width="100%"><table border="0" width="100%" cellspacing="0" cellpadding="2" bgcolor="#FF9900"><tr><td width="100%" bgcolor=""><font size=2 face="Verdana, Helvetica, sans-serif">Originally posted by 11psiGSR:
Vactor: You are welcome to mine... It is for 440cc injectors, but I'm running 11psi. It could use a little work though, even on my car.
Allan</font></td></tr></table></td></tr></table></BLOCKQUOTE>
What pulleys are you running to get to 11 psi? I'll e-mail my settings to both of you, I'd be interested in yours as well Allan. We could have our own support group [img]cool.gif[/img] .
-
November 4th, 2002, 10:59 PM
#6
Inactive Member
this is what i was taling about guys!! pete, thanks for the email with the attachment!! i will be programming my handheld toninght, as i will be egtting the injectors back at week's end. thanks again!!
-
November 5th, 2002, 11:46 AM
#7
Inactive Member
I'm using a stepper and a 3.8" blower pulley. I need to download my settings. I'll send them to you in a day or two.
Allan
-
November 6th, 2002, 12:23 PM
#8
Inactive Member
hey guys I'm using the PMS as well, do you think you can send me some of the tables as well, just wanted to look at them and compare thtem with mine. I'm only using the hand held unit, you think the software is worth the money??
With the PMS unit, i have the M45 with Jim's pulley-9psi, 440cc RC injectors, MSD SCI ignition, blaster ss coil and the list continues at the bottom.....
You guys can E-mail me at:
[email protected]
Thanks in advance
Defconsc
-
November 6th, 2002, 12:25 PM
#9
Inactive Member
BTW anyone using the PMS on a B18B- SC M45????
-
November 9th, 2002, 02:26 AM
#10
Inactive Member
Hey guys, sorry for joining the party late. I have a PMS running my JRSC'd R motor w/7psi. I am all for sharing tunes. BTW, I have the interaq software as well.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks