Results 1 to 5 of 5

Thread: 802D's

  1. #1
    Senior Hostboard Member amandarae's Avatar
    Join Date
    January 12th, 2008
    Posts
    259
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    802D's

    Hello guys,

    Anyone thinking of parting with their spare 802D, or 802D's(pair). Please contact me!

    I am posting my inquiry here because of my unfortunate buying history on Ebay. I had two pairs of 802D's and both of the pair I got have one of each had audible difference in output(low in output). Of course, I do not have the two pairs at the same time as to mix and match as I returned the other pair first before getting another.

    I am tired of buying and negotiating for the return. In fact, I have two pairs of diaphragms bought from GPA(one pair is 8 and the other 16 ohms) that I accumualated thinking its from the diaphragms as the culprit.

    I was eyeing the last pair offered on ebay again but was outbid. I currently have one 802D. Looking for a pair or one will do. Please throw a member some bone if you will.

    Thank you very much!

    Abe
    QNME In Retro!

  2. #2
    Senior Hostboard Member magnarc's Avatar
    Join Date
    March 7th, 2005
    Posts
    615
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: 802D's

    That sounds possibly like one and/or both require a magnet recharge at GPA.

  3. #3
    Junior Hostboard Member nullspace's Avatar
    Join Date
    November 3rd, 2006
    Posts
    22
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: 802D's

    Hi Abe,

    I have a pair of 802D that I can send you. The magnets have been recharged by GPA, but like a dope I put a dent in one of the diaphragms. One of binding posts on one of the drivers is a bit iffy (why I had the back plate off in the first place).

    Let me know if you're interested.

    Regards,
    John

  4. #4
    Senior Hostboard Member amandarae's Avatar
    Join Date
    January 12th, 2008
    Posts
    259
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: 802D's

    Hi John!
    Can you please PM me and let's talk about this privately. Thank you very much!

    Abe
    QNME In Retro!

  5. #5
    Senior Hostboard Member amandarae's Avatar
    Join Date
    January 12th, 2008
    Posts
    259
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: 802D's

    Quote Originally Posted by nullspace View Post
    Hi Abe,

    I have a pair of 802D that I can send you. The magnets have been recharged by GPA, but like a dope I put a dent in one of the diaphragms. One of binding posts on one of the drivers is a bit iffy (why I had the back plate off in the first place).

    Let me know if you're interested.

    Regards,
    John
    Hello Joh,

    I responded to your PM. Hope it went through.

    Thanks,

    Abe
    QNME In Retro!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This forum has been viewed: 23808158 times.