-
November 20th, 2011, 01:25 PM
#1
HB Super Moderator
Re: 604-8g

Originally Posted by
magnarc
23739 should be a G cone, tho I've a driver with that cone but with a 16 ohm coil.
21184 is generally the cone part for the 515B 416 604E.
If I'm not mistaken there are 2 variants of the 21184 cones (21184-2 & 21184-4) The 21184-4 goes with the 416 and the -2 515 respectively IIRC.
-
November 21st, 2011, 04:59 PM
#2
Junior Hostboard Member
Re: 604-8g
I have a friend with 904 drivers with same 211 code, so, I'm assuming a 904 cone kit was used? Both drivers sound very similar although the stock one is a little heavier. The sound out of these speakers is absolutely amazing. They definitely do things my 19's can't.
-
November 21st, 2011, 05:40 PM
#3
Junior Hostboard Member
Re: 604-8g
PS for you Altec fans. 604-8G mounted in Hill Craft cabs.
Last edited by fatwax; November 24th, 2011 at 12:01 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
This forum has been viewed: 27889751 times.
Bookmarks